1700°C Tube Furnace

YBOTECH 1700ºC tube furnace is used in sintering and high temperature heat treatment of metal materials, ceramic materials, nano materials, semiconductor materials, powder metallurgy and other new materials in colleges and universities, scientific research institutes, factories and enterprises, petrochemical, aerospace and other industries.

Feature
gradeFurnace Shell
  1. The shell is made of metal Q235 low-carbon steel, and the surface is electrostatically resistant and resistant to corrosion.
  2. The solid double-layer metal frame is combined with the heat-insulating fan structure, and the furnace surface temperature is low.
  3. Horizontal use mode, upper opening structure, easy to operate.
gradeRefractory Material

Multi-layer insulation design, composed of lightweight alumina ceramic fiber and high-quality insulation board backing, does not contain asbestos components, low heat loss and low energy consumption

gradeHeating System
  1. The high-quality Mosi2 heating element is safely and firmly installed on both sides of the furnace, and is heated by free heat radiation in the furnace cavity, which is energy-saving and efficient, and has a long service life.
  2. Heating on both sides (left and right sides), so as to achieve good uniformity in the furnace.
gradeTemperature Control Panel
  1. PID and SSR control mode, precise temperature control.
  2. International standardized B-type Ni – Cr silicon thermocouple, temperature range 0-1800°C, long service life.
  3. Equipped with heating indicator light and over-temperature alarm buzzer.
gradeProgram Controller
  1. Advanced controllers that meet complex process requirements.
  2. Simple and direct operation, flexible programming.
  3. Programmable 4 curves, 8 program segments for a single curve.
  4. Over temperature and fault alarm, automatic safety protection.
gradeVacuum Atmosphere Function
  1. With 304 stainless steel sealing flange to obtain vacuum or atmosphere in the furnace tube.
  2. High-quality quartz glass working tube, and metal or corundum working tube can also be selected to adapt to different working conditions.

1700°C Tube Furnace

Technical Specification

Model YBG-40-17 YBG-60-17 YBG-80-17 YBG-100-17
Tube size Φ40x900mm Φ60x900mm Φ80x900mm Φ100x900mm
Max. Temperature 1700ºC
Working temperature 1600ºC
Heating zone size 300mm
Power supply 220V/3KW 220V/4KW 220V/5KW 220V/5KW
Heating element MoSi2
Furnace material Polycrystalline inorganic alumina ceramic fiber material prepared by wet vacuum filtration
Furnace tube material High purity corundum tube
Temperature control accuracy ±1ºC
Temperature measuring element B-type national standard platinum rhodium thermocouple
Temperature control instrument Intelligent microcomputer PID temperature control instrument, SSR control, PID parameter self-tuning function; programmable 4 groups of 8 program segments, program temperature rise, program heat preservation, program cooling
Heating rate 1-15ºC/min free adjustment
Furnace structure Furnace temperature control integrated structure; double-layer shell, air circulation and heat insulation
Sealing performance Both ends of the furnace tube are equipped with stainless steel metal flanges, matched with high-temperature PTFE gaskets, which can work under vacuum with a vacuum degree of ≤5pa (rotary vane vacuum pump)
atmosphere performance There are air inlets and outlets at both ends of the flange. The pressure gauge is installed on the metal flange. The precision needle valve can adjust the air intake and output, and can be fed with protective gases such as nitrogen, argon, and hydrogen.
equipment protection Modular control, sound and light alarm signal will be sent out for over temperature and broken coupler in the working process, and the protection action will be completed automatically
safety protection The equipment is equipped with a circuit breaker, which will automatically pop open in case of short circuit leakage, which can protect the safety of equipment and operators
shell High-quality cold-rolled steel plate CNC machine tool blanking processing, after welding, grinding, polishing, phosphating, pickling, surface electrostatic spraying plastic powder
Quality Certification ISO9001, CE
The standard configuration 1. 1 furnace body 2. 1 temperature controller 3. Power cord 3 meters 4. 1 thermocouple 5. 1 manual
6. One furnace hook 7. One pair of high temperature gloves 8. Two pipe plugs 9. One set of sealing flange
Optional accessories 1. Optional rotary vane vacuum pump (vacuum degree ≤ 5pa) 2. Optional digital vacuum gauge ((1.0×105-1.0×10-1pa)) 3. Optional float flowmeter (range 60-600ml/min) 4 , optional corundum boat

1700°C Tube Furnace

Accessories:

1. Furnace body 1 set
2. Temperature controller 1
3. Power cord 3 meters 1
4. Thermocouple 1
5. Instruction manual 1
6. Crucible pliers 1
7. High temperature gloves 1 pair

Related suggestion

Request for quotation

Name *
Fill out this field
E-mail *
Please enter a valid email address.
Phone *
Fill out this field
Country
Fill out this field
Company name
Fill out this field
Leave a message *
Fill out this field