Vortex Mixer MX-S

YBOTECH Vortex Mixer MX-S is a simple device used commonly in laboratories to mix small vials of liquid. It consists of an electric motor with the drive shaft oriented vertically and attached to a cupped rubber piece mounted slightly off-center. As the motor runs the rubber piece oscillates rapidly in a circular motion. When a test tube or other appropriate container is pressed into the rubber cup (or touched to its edge) the motion is transmitted to the liquid inside and a vortex is created. Most vortex mixers are designed with 2 or 4-plate formats, have variable speed settings ranging from 100 to 2,800 rpm, and can be set to run continuously, or to run only when downward pressure is applied to the rubber piece.

  • Touch operation or continuous mode
  • Variable speed control from 0 to 3000rpm
  • Used for various mixing applications with optional adapters
  • Specially designed vacuum suction feet for body stablility
  • Robust aluminum-cast construction

Specification of Vortex Mixer MX-S

Specifications Vortex Mixer MX-S
(Adjustable speed)
Voltage 110-120V/220-230V,50/60Hz
Power 60W
Mixing motion Orbital
Orbital diameter 4mm
Motor type Shaded pole motor
Motor rating input 58W
Motor rating output 10W
Speed range 100-3000rpm
Speed display Scale
Run type Touch operation/Continuous
Dimension[W×H×D] 127×130×160mm
Weight 3.5kg
Permissible  ambient temperature 5-40 °C
Permissible relative humidity 80%RH
Protection class IP21

Accessories of Vortex Mixer MX-S

Accessories of Vortex Mixer MX  
Cat. No. P/N Descriptions
18900034 VT1.1 Standard top cup,for <Ø30mm tubes and small vessels
18900044 VT1.2 Tube holding rod, used with VTI.3.1 to VTI.3.5
18900035 VT1.3 Universal top plate,100mm plate attachment , free of Rubber vacuum suction foot (18900158, 4pcs)
18900020 VT1.3.1 Tube adapter, for 48 holes test tubes, Ø6mm, used with VT1.3/ VT1.2/PS1.1
18900021 VT1.3.2 Tube adapter, for 15 holes test tubes, Ø10mm, used with VT1.3/ VT1.2/PS1.1
18900022 VT1.3.3 Tube adapter, for 16 holes test tubes, Ø12mm , used with VT1.3/ VT1.2/PS1.1
18900023 VT1.3.4 Tube adapter, for 8 holes test tubes, Ø16mm, used with VT1.3/ VT1.2/PS1.1
18900024 VT1.3.5 Tube adapter, for 8 holes test tubes, Ø20mm, used with VT1.3/ VT1.2/PS1.1
18900043 VT1.3.6 Platform pad, for <Ø99mm tubes and small vessels
18900158 VT1.3.7 Rubber vacuum suction foot with screw, 1pc

Related suggestion

Request for quotation

Name *
Fill out this field
E-mail *
Please enter a valid email address.
Phone *
Fill out this field
Fill out this field
Company name
Fill out this field
Leave a message *
Fill out this field